Skip to content

Static vs Dynamic IP Address: What Is the Difference and Which Do You Have?

By IP Addresses Updated 11 min read

0:00
0:00

Static vs dynamic IP, in short: a static IP is reserved for your connection by your ISP and changes only if the provider reassigns it. A dynamic IP is leased through DHCP (RFC 2131) and can change when the lease ends. Most home connections are dynamic. Your router’s WAN settings usually show which; your ISP contract settles it.

This guide explains how leases work, what a static address is actually for, and four ways to find out which kind you have. It also covers the everyday questions: does a router restart, a move or a VPN change your IP? If you only need the address itself, check your public IP first and keep it handy while you read.

What is the difference between a static and a dynamic IP address?

According to AT&T’s support article on static and dynamic IPs (updated March 2024), “a dynamic IP address changes from time to time.” By contrast, “a static IP address, however, never changes and can be assigned to a specific device.” AT&T adds that dynamic assignment is how “most ISP and corporate networks assign IP addresses to their customers.”

White Wi-Fi router standing on a table
Credit: Compare Fibre via Unsplash

Looking at the address alone tells you nothing. A static 203.0.113.10 and a dynamic 203.0.113.10 are the same four numbers. The difference is a promise from your provider: either this address belongs to your connection, or it’s on loan and may go back into the pool.

AspectStatic IPDynamic IP
How it is assignedSet by the network administrator or reserved for you by the ISPLeased automatically by a DHCP server for a limited time
Does it change?No, not unless the provider reassigns itIt can, when the lease lapses or the ISP renumbers
Who usually has oneBusinesses, servers, offices with remote access needsMost home broadband and mobile connections
CostOften extra, or only on a business planIncluded with the connection
Reaching your network from outsideEasy: the address is always the sameNeeds dynamic DNS or another workaround
Linkability over timeHigh: the same address follows you for yearsLower: the address can rotate

RFC 2131, the DHCP standard, describes three ways to hand out addresses: automatic (permanent), dynamic (for a limited time) and manual (picked by an administrator, delivered by DHCP). So a “static” IP from your ISP may still arrive through DHCP. The server just gives your connection the same address every time.

That’s why “my router says DHCP” doesn’t always mean dynamic. On some business lines the router can be set to DHCP and still receive a fixed address, because the reservation lives on the ISP’s side. The contract, not the router screen, is the final word.

How dynamic IP addresses work (DHCP leases)

Dynamic addressing runs on DHCP, defined in RFC 2131, the Dynamic Host Configuration Protocol (March 1997). It says dynamic allocation “assigns an IP address to a client for a limited period of time,” and that this period “is referred to as a ‘lease’.” Your router is the client, and your ISP runs the server.

Lease renewal: the T1 and T2 timers

A client doesn’t wait for its lease to run out. RFC 2131 sets two timers: “T1 defaults to (0.5 * duration_of_lease)” and “T2 defaults to (0.875 * duration_of_lease).” At T1 the client asks the server that granted the lease to extend it. If that fails, at T2 it asks any DHCP server that will answer.

A router that stays online and renews on schedule often keeps the same public address for long periods. Changes tend to come when the lease lapses: a long power cut, an extended outage, new equipment, or the ISP renumbering its network. How long a lease lasts is the ISP’s choice, and providers rarely publish it.

Two layers: your public IP and your private IPs

There are two DHCP conversations in a typical home. Your ISP leases a public IP to your router. Your router then runs its own DHCP server and leases private IPs such as 192.168.1.20 to your laptop, phone and TV.

When people ask “is my IP static?”, they almost always mean the public one, because that’s the address websites and remote services see. Inside your home, you control the answer. Most routers let you reserve a private address for a device, which is the “manual allocation” RFC 2131 describes. Printers and NAS boxes are the usual candidates.

When the public IP isn’t really yours: CGNAT

Many ISPs, mobile carriers especially, put customers behind CGNAT (carrier-grade NAT). Your router gets a private-style address from the carrier, and the public IP the internet sees is shared with other customers. That shared address can change for reasons that have nothing to do with your equipment, and you can’t reserve it.

What is a static IP address used for?

A static IP is for anything that must be found at the same address every time. Inbound services and allowlists both depend on that. The common uses:

  • Hosting a server: a website, game server or file server that others connect to directly.
  • Remote access: remote desktop or a VPN back into a home or office network.
  • IP allowlisting: a bank, supplier or SaaS admin panel that only accepts connections from approved addresses.
  • Cameras and NAS without dynamic DNS: reaching a recorder or storage box by a fixed address.
  • Email servers: receiving mail needs a stable address, and sending mail works better when the reverse DNS (PTR) record matches your mail hostname.
  • Some business VoIP: certain phone systems and SIP trunks are configured against a known address.

Static IP blocks: why 8 addresses give you 5

AT&T sells static IPs in blocks of 8 to 64 addresses and reserves three addresses in each, so the usable count is always three short. Those three are typically the network address, the broadcast address and the gateway.

Block size (total addresses)Usable addresses
85
1613
3229
6461

Source: AT&T support article KM1002300, updated March 2024. If your provider gives you a block in CIDR form, a subnet calculator shows the network, broadcast and usable range.

How do I know if my IP is static or dynamic?

The router’s WAN settings give the quickest answer, and your ISP contract gives the definitive one. Assume dynamic unless you ordered and pay for a static IP. These four checks go from fastest to most certain:

  1. Open your router’s admin page. Find the WAN or Internet section. A connection type of “DHCP”, “Dynamic IP” or “Automatic” points to dynamic. “Static IP”, with the address and gateway typed in by hand, means static. PPPoE connections can be either.
  2. Watch your public address over time. Check your public IP now, note it, then check again after restarting the router and over a few days. A change proves it’s dynamic. An unchanged address proves nothing, because dynamic leases often renew to the same IP.
  3. Read the reverse DNS name. Run a reverse DNS lookup on your public IP. Words like “dynamic”, “dhcp”, “pool” or “static” in the hostname are hints from the ISP’s naming scheme, not proof.
  4. Ask your ISP or read the contract. A static IP is normally a named line item or add-on. If it isn’t on your bill, you almost certainly don’t have one.

In our lookup of 24.48.0.1 (1 November 2026), the reverse DNS name was modemcable001.0-48-24.mc.videotron.ca. The network was Videotron, the approximate location Montreal, and the type Residential. The name describes a cable modem, but it doesn’t say static or dynamic.

That’s the honest limit of outside tools, ours included. The IP lookup shows your public IP, ISP, reverse DNS, approximate location and a type such as Residential or Datacenter. None of those fields can tell static from dynamic, because that’s an agreement between you and your provider.

Does my IP address change when I restart the router, move or use a VPN?

Sometimes yes, sometimes no, and the reason is usually the DHCP lease. Under RFC 2131 (1997), an address is leased for a period, so a quick router restart inside a valid lease often brings the same IP back. Moving, switching networks and new hardware are different stories:

What you doDoes your public IP change?Why
Restart the routerMaybe, not alwaysOn a dynamic line, the lease may still be valid and renew to the same address
Move houseYesIt’s a new connection, often in a different part of the ISP’s network
Turn on a VPNSites see a different IPTraffic leaves from the VPN’s server; your ISP-assigned IP is unchanged
Switch from Wi-Fi to mobile dataYesYour phone is now on the mobile carrier’s network, which assigns its own (often shared, CGNAT) address
Install a new routerPossiblyThe ISP may see new hardware and issue a new lease; it depends on the ISP
Static IP: restart or replace the routerNoThe address is reserved for your connection, not the device

Restarting the router

On a dynamic line, a short restart often brings the same address back, because the lease is still valid. Leaving the router off for longer gives a change better odds, though nothing guarantees one. A new router is less predictable: some ISPs issue a fresh lease when they see new hardware, and others don’t.

Using a VPN or a relay

A VPN doesn’t change the IP your ISP gave you. It changes the IP that websites see, because your traffic exits from the VPN provider’s server. Apple’s relay works on the same principle for Safari; our guide to iCloud Private Relay explains which address sites see when it’s on.

Do you need a static IP?

Most people don’t. Browsing, streaming, gaming and video calls all work fine on a dynamic address. You need a static IP when something outside must reach you, or trust you, by a fixed address.

You probably need one if

  • A partner, bank or admin panel only accepts connections from an allowlisted IP.
  • You run a mail server and need a matching PTR record.
  • Several staff connect to an office VPN or server every day, and a changing address would break their setup.
  • Your phone system or another service is configured against a known address.

You probably don’t if

  • You only browse, stream, game and make calls.
  • You reach one home machine now and then, and dynamic DNS can handle it.
  • Your services already run in the cloud, where the server can have its own fixed address.

Dynamic DNS: the cheaper alternative

Dynamic DNS gives a changing IP a fixed name. A small client on your router or computer notices when your public address changes and updates a DNS record, so home.example.com always points at you. The underlying protocol is RFC 2136, Dynamic Updates in the DNS (April 1997), which adds and removes records in a live zone. Consumer DDNS services generally use their own web APIs on top.

For remote desktop into one home PC, DDNS is usually enough. Our walkthrough on how to find your public IP for remote desktop covers the address side. Two caveats: allowlists need an IP, not a name, and DDNS can’t help behind CGNAT, because incoming connections never reach your router in the first place.

The downsides of a static IP

A static address often costs extra or requires a business plan. It’s also easier to target: anyone who finds an open port at that address can come back to it tomorrow. And because it never rotates, it links your activity together over months or years. If you get one, close the ports you don’t use and keep exposed services patched.

Static and dynamic addresses in IPv6

IPv6 splits the question in two: the prefix your ISP gives your network, and the address each device builds inside it. RFC 8981 on IPv6 temporary addresses (February 2021) sets a default valid lifetime of 2 days and a preferred lifetime of 1 day for them. So your device’s address changes by design, even on a fixed prefix.

The prefix comes through prefix delegation. Your ISP hands the router a block of addresses, and the router announces part of it to your devices. Some providers keep that prefix stable for a connection; others change it, much like a dynamic IPv4 lease. Whether yours is fixed is, again, a question for the ISP.

Inside the prefix, devices create temporary addresses for outgoing connections so sites can’t link your activity through one stable address. RFC 8981 replaced RFC 4941 and “removes the recommendation that temporary addresses be disabled by default.” Devices generally keep a stable address alongside the temporary ones for incoming connections.

This changes how allowlisting works. On IPv4 you allowlist one static address. On IPv6, allowlisting a device’s temporary address will break within days as temporary addresses rotate. Allowlist the delegated prefix instead, and only if your ISP confirms it’s static.

Two monitors on a home-office desk beside a bookshelf and storage boxes
Credit: Vadim Sherbakov via Unsplash

Frequently Asked Questions

What is a static IP address?

A static IP address is an IP address that stays fixed. For your internet connection, it’s a public address your ISP reserves for you, so it’s the same every time you connect. AT&T’s support page (March 2024) says it “never changes and can be assigned to a specific device.” On your home network, a router reservation does the same for a device’s private IP.

Is my IP address static or dynamic?

It’s almost certainly dynamic unless you ordered a static IP and see it on your bill. To confirm, open your router’s WAN settings and look for “DHCP” or “Dynamic” versus “Static.” You can also note your address on the IP lookup page and check again over several days. A change confirms dynamic; no change proves nothing.

How often does a dynamic IP change?

There’s no fixed schedule. It depends on the lease length your ISP sets and whether your router stays connected long enough to renew. Under RFC 2131, a client tries to renew at half the lease and again at 87.5%. A router that’s always online often keeps one address for a long time, while outages make a change more likely.

Does restarting the router change my IP?

Not always. A quick restart often renews the same lease, so you get the same public address back. Leaving the router off longer, or until the lease would have expired, raises the chance of a new IP. On a static IP, or behind CGNAT, a restart gives you no control over the address at all.

Does my IP address change when I move?

Yes. Moving means a new connection, often on a different part of your ISP’s network, so you get a different public IP even with the same provider. A static IP moves with you only if the ISP agrees, so ask before you move. Either way, update any allowlists or remote access settings that used the old address.

Does a VPN change my IP address?

A VPN changes the IP address that websites and apps see, not the one your ISP assigned. Your traffic leaves from the VPN server, so sites see the VPN provider’s address and its approximate location. Your router’s public IP stays exactly as it was, and turning the VPN off brings the original address back into view.

Do I need a static IP for remote desktop?

Usually not. For one home computer, dynamic DNS keeps a hostname pointed at your changing IP, and that’s enough for most people. A static IP helps when an office firewall allowlists by address or many users connect daily. Our guide to finding your public IP for remote desktop covers the address side. Behind CGNAT, dynamic DNS alone won’t get you in.

Is a static IP more secure?

No. If anything, a static IP is a little more exposed. A fixed address is easier to target, because anyone who finds an open service can return to it later. It also links your activity together over time. Security comes from what you expose: closed ports, patched software and strong authentication. A dynamic IP isn’t protection either, only a moving target.

Can I get a static IP for my home?

Sometimes. Many providers offer static IPs only on business plans, while others sell them as an add-on to residential service. Ask your ISP directly, because availability and price vary by provider and region. If yours says no, dynamic DNS or a cloud server with its own fixed address are the usual workarounds.

What is dynamic DNS?

Dynamic DNS is a service that keeps a hostname pointed at an IP address that changes. Software on your router notices a new public IP and updates the DNS record automatically. It builds on RFC 2136 (1997), the standard for live DNS updates. Many routers have a DDNS setting built in, so setup is usually a hostname and an account login.

Create your free account

Get access to IP lookup tools, bulk reports, and more. Free forever.